Capital Equipment Suppliers

300 tph Gencor plant 3- 150 ton silos (Astec) ! silo not in use and needs lined 60’ truck scales 80’ astec slat 1 astec tsransfer conveyor in use (2nd transfer is not mounted) 48’x9’ Herman grant drum shell (1/2”, replaced in 2011) on GENCOR FRAME (portable) UltraFlame II Gencor burner (135, I think) set up for propane 48k ACFM baghouse with 54k ACFM upgrade package (Gencor with 150hp fan and dedicated compressor) 2 deck 4x12 agg screen (valu-king??) Single deck rap screen 4- cold feed bins (need relined, Probably the worst iron on the plant) 1-RAP bin (needs Grizzly replaced) 24”x60’ agg weigh belt 24”x45’ agg screen feed belt 36”x36’ RAP reject belt 24”x80’ RAP weigh belt A/C calibration tank (new in 2011) HiWay hot oil heater 1.5MM BTU (rebuilt hot oil pump 2018) Single 30K A/C tank (new 2011) Complete control house with Martin controls

Counterflow Plant

1994 Astec 300 TPH Stationary Counterflow Drum Asphalt Plant
4 bin portable cold feeds 9x14 Tandem axle 24" feeder belts 30" collector Portable virgin scale conveyor 30" belt 60' long nominal Single axle portability Portable RAP scale conveyor 30" belt 60' long nominal Single axle portability Double deck RAP screen Double deck virgin screen Portable split level control house Individual bucket MCC No plant controls Tandem axle portability Dismantled and move to RBS equipment yard. No silos or tanks included
• Terex E300 Counterflow 300 TPH Drum. • Standard Havens Magnum 55K ACFM Baghouse • Gencor AF-75 Burner, 1980 Model • Three 200-ton Cedar Rapids silos • 400 BBL Dust Silo • 4’x10’ Double Deck Screen • Heatec Fuel Tank with Containment • Maxam Inclined RAP Bin • Original Manuals Included
Astec Counter Flow Double Barrel Drum: 8'.5" x 44" Portable CF Drum, 200 hp Drive Package with Saturn Reducer, This drum is a recycle drum with Astec's Double Pass Technology the inner drum is a dryer with the material being passed to the outer mixing drum. The mixing is provided via a pugmill style mixing system with Arms and Tips. The Mixing section is accessible through a hydraulically raised side door. The heat is provided by a Hauck SJO 580 Combo Burner (Oil/Gas) the burner is complete with pump package and gas train. The drum has a hydraulic leveling kit on the frame for ease of set up. The unit has a hydraulic portable pump kit included. The unit is mounted of a Quad Axle Configuration "Unit will come with rims and road-able tires. (All the Shanks and Tips were replaced 2 months a go. Ware liners were replaced in the rear of the drum at the same time. The Inlet chute was recently lined with ceramic and the drum was re-flighted 36 months ago. The reducer just had a oil change this week with synthetic oil). Astec Pulse-Jet Baghouse: "68TDP" The Portable 68,000 ACFMbaghouse was beefed up by Astec for the larger CFM. The Pulse-Jet Baghouse has a total of 1088 bags, 952 - 4.5/8" x 96.5" and 1364.5/8" x 84.5". There are twin 125hp motors on the 54" Fan. A 60hp Quincy compressor provides the compressed air for the cleaning action. The bags have aprox 450,000 tons of production since bags replaced and the burner has been burning only NAT GAS. The unit is mounted on a Triple Axle Configuration. Unit will come with rims and road-worthy tires. Astec Pre-Cleaner: The Astec horizontal Cyclone has Recent Ceramic liners in the last 12 months. The unit has been fitted with legs for space savings but could be remounted to the portable fuel tank as it came from the factory and be portable again. Cold Feed System: (PCFB1014-5) The Astec Portable Five (5) Bin Cold Feed System has 10' x 14' large bins with removable bin dividers/extensions. The 24" x 10' Variable Speed Feeders have been fitted with non spill walled belting and have 3HP BLACK MAX Motors along with Dan Foss controllers there is no-flow and tachs censers on the bins also. Two (2) of the bins have electric bin vibrators. There is a internal 24" walkway to service the feeders and side bulkhead walls. The 30" x 88' inclined collecting conveyor is in good condition. The unit is mounted of a Quad Axle Configuration "Unit will come with rims and road-able tires. Screening System: The Astec Portable All in One Screening system includes a 4' x 10' Double Deck screen with reject chutes. The material from the CF feeds a 30" x 15' incline conveyor to the screen deck. The screened material feeds on to a 30" x 45' Incline weigh bridge conveyor to the drum. The unit is mounted of a Single Axle Configuration "Unit will come with rims and road-able tires. Recycled Asphalt Feed System: A Heavy-Duty Custom Built (Stationary) 2 bin RAP system is included to provide crushed recycled Asphalt to the drum. The unit consists of TWO (2) 8' x 12' Bins with Heavy incline grizzlies over the bins. The bins have removable bin extensions and a 24" side walkway along the whole system. The 30" x 13' 5 hp A.C. feeders are controlled by Dan Foss controllers. A 30" x 80' conveyor with a incline at the end to the 4' x 8" Double Deck Screen. Oversized material feeds on to a 24" x 45' conveyor that has a 20"x 20" magnet to a 2008 Tellsmith Hammermill with feeds crushed material back on to the incline conveyor to the screen deck. Liquid A.C. System: A 30,000 horizontal (Skidded) A.C. Tank is provided for the storage of liquid A.C. The direct fired burner (Late Model) is set up on Nat Gas to provide the heat. The tank has a heat scavenger package including coils, Rebuilt Pump, and expansion tank. The tank skin is good condition. A 3" pump on pump metering package is mounted on a heated 1,000 gallon calibration tank. There is a 3" unloading pump package included. A 15,000 gallon walled fuel tank is mounted to the same frame as the cyclone and ductwork for travel purposes. The unit is mounted of a Tandem Axle Configuration "Unit will come with rims and road-able tires. Asphalt Storage: 400 tons Two (2) 200 ton asphalt storage silo's are provided. Silo #1 is a 2009 Dillman, Silo #2 is a Astec. Both silo's have ceramic lined cones and lined up the walls 3 feet. The anti-segregation batchers are relined with AR Steel both the silo's cones are oil heated with electric heat on the gates. The Dillman silo has safety gates. The 15' double chain oil heated transfer slat is in very good condition. The Astec Slat conveyor is rated at 300TPH with a single chain, The slat has a reject martial chute and the floor is oil heated. There is a 24" side ladder provided for maintenance access. The slat is excellent condition with aproximately 500,000 tons on a rebuild "New Floor Chrome Carbide, New REX Chain and Slats". A 2017 B-Tech 95' Scale is provided for accurate material weigh out. Controls: The controls are located in block Buildings (NO CONTROL HOUSE BUILDING, JUST CONTROLS AND MCC CENETR). Astec PMII controls handle the mixing and Weighmate Silo Load out hands the material loading. There is controls for the cold feed, recycle, burner and manual back ups stations also. All are located in in easily moved cabinets. Motor Control is handled with a GE 800 M.C. a 1,600 amp main with VFD for the baghouse fan and Soft starts for both the baghouse and drum motors. There is a Nema cabinet loaded with Dan Foss Controllers for the cold-feed and RAP Bins along with the A.C. Metering Skid. Overall, the equipment is in a 8 out 10 condition and only available because they are combining two plants into one large stationary site. The drum, baghouse and cold feed will be in service until Jan 2020 the rest of the equipment is available for removable today. There has been many many upgrades to the equipment and the maintenance is exceptionable. The plant will have some wire but you may need to rewire upon new set up. The plant has wire trays and A.C. Line. What spare parts are pertinent to the equipment will go.
1997 Astec Six-Pack 250 TPH Portable Counterflow Drum Asphalt Plant
Gencor 300 TPH Stationary Counterflow Drum Plant
\